Duraflow FH2 Readypak

by: Product Code: 2031664

Duraflow FH2 Readypak

Product Code:2031664

THIS PRODUCT IS NO LONGER AVAILABLE

The DURAFLOW with FH2 is designed with end-user high protection and comfort in mind.
Lightweight and a comfortable full hood with integrated eye protection and shoulder cape.

Description

2031664 – 3M Scott Duraflow FH2 Readypak

This FH2 Duraflow Readypak includes;
1 x 3M Scott Safety Duraflow Powered Air Purifying Respirator, battery & Belt
1 x 3M Scott Safety FH2 Full Hood
1 x Fixed Length PU Hose
2 x PF10 P3 Particle Filter Cartridges

The DURAFLOW with FH2 is designed with end-user high protection and comfort in mind.
Lightweight and a comfortable full hood with integrated eye protection and shoulder cape. Provides TH3 (APF 40) Highest level of PAPR respiratory protection plus face & eye protection. Can be worn for long periods/shifts without burdening the user. The enhanced comfort is ideal while working in the most demanding environments by providing workers with the high protection plus the added cooling effect of purified air at 160 litres per minute. This is much more comfortable than wearing a negative pressure tight-fitting facemask.

Active Flow Control
Provides guaranteed 160 l/min which meets industry best practice and country-specific requirements. Notification of achieving correct flow rate on start-up

Low profile and compact
Reduced user burden and snag hazard, lightweight and fits ergonomically in the lower back. Total weight of pack approx. 1.74kg. The hood only weighs 230g.

Advanced alarm systems providing essential performance information to the user
Increased user confidence that the unit is working properly. Alarm to notify the user when flowrate reaches required flowrate; low battery alarm to notify when a user must evacuate contaminated work area; low flow alarm if flowrate drops below the required level during operation.

Two battery options available
Standard and extended removable batteries available for uninterrupted work shifts. Batteries can be charged in one shift or less for an increased turnaround (re-charge time depends on battery condition and whether standard/extended battery)

Fully Serviceable
UK Safety Products (Flameskill) are a 3M Scott approved service centre. The main DURAFLOW parts are replaceable. We offer servicing, maintenance, warranty support and carry the spare parts in stock.

Did you know?

  • According to HSE Guidance (HSG53), all users of negative pressure should take a break at least every hour to reduce the risk of wearer fatigue. Wearing powered air respirators removes this need and so employees can work continuously, more comfortably for longer durations.
  • Employees who have a beard or facial hair are not suitable to use tight-fitting negative pressure respirators, therefore the recommended alternative is Powered Air respiratory systems. Powered Air Respirators, when worn with loose-fitting head tops, are a convenient alternative solution, allowing users to retain facial hair and high levels of protection against hazards.
  • Powered Air Respirators are cooler. Heat levels within a powered air respirator head top are lower than using negative pressure as breath exhalation can cause heat build-up within the mask. Powered air respirators are fan assisted, providing a cooling effect for wearers.

Downloads

Cleaning and disinfecting 3m powered air purifying respirators technical bulletin 200 KB
Duraflow Maintenance 132 KB
Duraflow Questions Answers 319 KB
Duraflow Technical Datasheet 329 KB
FH2 Datasheet 185 KB
FH2 Maintenance 126 KB
PF10 P3 PSL R Filter 54 KB

Additional Information

Weight 1.74 kg
Standards EN 12941 CE 0086
Country of origin UK
Test / Service Certificate Valid for 12-months

Product Contents

DescriptionQty
Duraflow Powered Air Respirator 1
Belt1
Standard duration 8hr battery1
Battery Charger1
PF10 P3 Filter2
FH2 Full Hood & Fitted with PU fixed-length hose. 1

Description

2031664 – 3M Scott Duraflow FH2 Readypak

This FH2 Duraflow Readypak includes;
1 x 3M Scott Safety Duraflow Powered Air Purifying Respirator, battery & Belt
1 x 3M Scott Safety FH2 Full Hood
1 x Fixed Length PU Hose
2 x PF10 P3 Particle Filter Cartridges

The DURAFLOW with FH2 is designed with end-user high protection and comfort in mind.
Lightweight and a comfortable full hood with integrated eye protection and shoulder cape. Provides TH3 (APF 40) Highest level of PAPR respiratory protection plus face & eye protection. Can be worn for long periods/shifts without burdening the user. The enhanced comfort is ideal while working in the most demanding environments by providing workers with the high protection plus the added cooling effect of purified air at 160 litres per minute. This is much more comfortable than wearing a negative pressure tight-fitting facemask.

Active Flow Control
Provides guaranteed 160 l/min which meets industry best practice and country-specific requirements. Notification of achieving correct flow rate on start-up

Low profile and compact
Reduced user burden and snag hazard, lightweight and fits ergonomically in the lower back. Total weight of pack approx. 1.74kg. The hood only weighs 230g.

Advanced alarm systems providing essential performance information to the user
Increased user confidence that the unit is working properly. Alarm to notify the user when flowrate reaches required flowrate; low battery alarm to notify when a user must evacuate contaminated work area; low flow alarm if flowrate drops below the required level during operation.

Two battery options available
Standard and extended removable batteries available for uninterrupted work shifts. Batteries can be charged in one shift or less for an increased turnaround (re-charge time depends on battery condition and whether standard/extended battery)

Fully Serviceable
UK Safety Products (Flameskill) are a 3M Scott approved service centre. The main DURAFLOW parts are replaceable. We offer servicing, maintenance, warranty support and carry the spare parts in stock.

Did you know?

  • According to HSE Guidance (HSG53), all users of negative pressure should take a break at least every hour to reduce the risk of wearer fatigue. Wearing powered air respirators removes this need and so employees can work continuously, more comfortably for longer durations.
  • Employees who have a beard or facial hair are not suitable to use tight-fitting negative pressure respirators, therefore the recommended alternative is Powered Air respiratory systems. Powered Air Respirators, when worn with loose-fitting head tops, are a convenient alternative solution, allowing users to retain facial hair and high levels of protection against hazards.
  • Powered Air Respirators are cooler. Heat levels within a powered air respirator head top are lower than using negative pressure as breath exhalation can cause heat build-up within the mask. Powered air respirators are fan assisted, providing a cooling effect for wearers.

Additional Information

Weight 1.74 kg
Standards EN 12941 CE 0086
Country of origin UK
Test / Service Certificate Valid for 12-months

Product Contents

DescriptionQty
Duraflow Powered Air Respirator 1
Belt1
Standard duration 8hr battery1
Battery Charger1
PF10 P3 Filter2
FH2 Full Hood & Fitted with PU fixed-length hose. 1

Newsletter

We use cookies to ensure that we give you the best experience on our website, find out more.