Description
For a durable, economical powered air respirator starter kit use 3M Powered Air Respirator System Starter Kit PF-619E. This kit includes a 3M PF-600E turbo unit, charger and belt. The 3M PF-600E turbo unit features audible and visual alarms that alert the user to low battery or if the flow rate falls below the manufacturer’s minimum design flow rate of 160 l/min. The unit incorporates a simple button operation and the button is shielded to prevent accidental shut-off. It’s designed to be compatible with a range of headtops and hoods, including some of the 3M Versaflo M-Series faceshields and helmets, Versaflo S-Series Hoods and Headcovers, tight fitting 3M Promask FM3 and 3M Vision FM4 Full facepieces. The PAPR can be used with the 3M DT-Series range of filters. The unit has an IP 65 rating with filters and decontamination plugs fitted to the filter and hose ports, making it suitable for cleaning by showering/water spray. The integrated battery is safely enclosed within the turbo unit casing and is rechargeable in-situ.
- Starter Kit includes a 3M PF-600E turbo unit, charger and belt.
- Compatible with the 3M DT Series filters and specific 3M Versaflo headtops
- Audible and visual alarms alert the user to low battery, if the flow rate falls below the manufacturer’s minimum design flow rate and particle blocked filter alarm.
- Durable design suitable for cleaning by shower/water spray
- Integrated battery and simple one-button functionality
- Filter costs are significantly less (Scott Pro2000 filters) than other powered air respirators
- Proflow can be fully serviced, repaired and maintained, unlike other PAPR units that are factory sealed.
- Filters are fitted facing downwards and are tucked away with less risk of bring knocked and damaged, or being saturated by rain.
- Single on/off sitch and charger socket are located underneath the unit, and aren’t exposed to knocks and debris/dust. The charger port also has a protective cover.
- Made in the UK
Compatible Filters
Compatible Headtops
Dental PAPR respiratory protection for aerosol generating procedures
- Twice the respiratory protection (APF 40) compared to FFP3 or reusable P3 half masks (APF20)
- Offers additional face & eye protection
- Can be worn for in excess of 1 hour without burden on the user
- Suitable for use with facial hair and doesn’t need fit testing
Did you know?
- According to HSE Guidance (HSG53), all users of negative pressure tight-fitting masks should take a break at least every hour to reduce the risk of wearer fatigue. Wearing powered air respirators removes this need and so employees can work continuously, more comfortably for longer durations.
- Employees who have a beard or facial hair are not suitable to use tight-fitting negative pressure respirators, therefore the recommended alternative is Powered Air respiratory systems. Powered Air Respirators, when worn with loose-fitting head tops, are a convenient alternative solution, allowing users to retain facial hair and have a high level of protection against hazards.
- Powered Air Respirators are cooler. Heat levels within a powered air respirator head top are lower than using negative pressure as breath exhalation can cause heat build-up within the mask. Powered air respirators are fan assisted, providing a cooling effect for wearers.
powered air respirator | powered air | powered hood | FFP3 respirator hood | powered respirator hood | battery powered air fed dust mask | FFP3 powered respirator | 3M respirator hood
