This FH6 Duraflow Readypak includes;
1 x 3M Scott Safety Duraflow Powered Air Purifying Respirator, Battery & Belt
1 x 3M Scott Safety FH6 Helmet & Visor
1 x Fixed Length PU Hose
2 x PF10 P3 Particle Filter Cartridges
The DURAFLOW with FH6 is designed for those requiring a powered respiratory solution with head protection included.
The Duraflow with FH6 features a heat-resistant polyamide helmet shell, adjustable head harness, face seal, air distribution channel inside the shell and a flip-up visor frame equipped with a clear or shaded visor. Choice of visors for protection against impact, reflection, heat, and infrared radiation are available. Provides TH2 (APF 20). Can be worn for long periods/shifts without burdening the user. The enhanced comfort is ideal while working in the most demanding environments by providing workers with respiratory protection, head protection plus the added cooling effect of purified air at 160 litres per minute. This is much more comfortable than wearing a negative pressure tight-fitting facemask.
Active Flow Control
Provides guaranteed 160 l/min which meets industry best practice and country-specific requirements. Notification of achieving correct flow rate on start-up
Low profile and compact
Reduced user burden and snag hazard, lightweight and fits ergonomically in the lower back. Total weight of pack approx. 2.44kg. The FH6 helmet only weighs 900g.
Advanced alarm systems providing essential performance information to the user
Increased user confidence that the unit is working properly. Alarm to notify the user when flowrate reaches required flowrate; low battery alarm to notify when a user must evacuate contaminated work area; low flow alarm if flowrate drops below the required level during operation.
Two battery options available
Standard and extended removable batteries available for uninterrupted work shifts. Batteries can be charged in one shift or less for an increased turnaround (re-charge time depends on battery condition and whether standard/extended battery)
The 3M Scott Duraflow must be serviced annually by an approved 3M Scott Service Centre. UK Safety Products (Flameskill) are a 3M Scott approved service centre. Please click here to arrange your annual service.
The main DURAFLOW parts & FH6 are replaceable. We offer servicing, maintenance, warranty support and carry the spare parts in stock.
Did you know?
- According to HSE Guidance (HSG53), all users of negative pressure should take a break at least every hour to reduce the risk of wearer fatigue. Wearing powered air respirators removes this need and so employees can work continuously, more comfortably for longer durations.
- Employees who have a beard or facial hair are not suitable to use tight-fitting negative pressure respirators, therefore the recommended alternative is Powered Air respiratory systems. Powered Air Respirators, when worn with loose-fitting head tops, are a convenient alternative solution, allowing users to retain facial hair and high levels of protection against hazards.
- Powered Air Respirators are cooler. Heat levels within a powered air respirator head top are lower than using negative pressure as breath exhalation can cause heat build-up within the mask. Powered air respirators are fan assisted, providing a cooling effect for wearers.